wisepowder: dense mesh of stainless steel at green facade of a building reflecting sunlight

wisepowder

dense mesh of stainless steel at green facade of a building reflecting sunlight 



For small to medium-sized greening projects and climbing plants such as clematis and honeysuckle. Distance from wall 6cm.To get more news about stainless steel green facade, you can visit mesh-fabrics.com official website.

This 60 Series spacer is designed for our standard cable diameter of 4 mm. Distance between spacers should not exceed approx. 2.5 m. The screw-on cable tensioners permit adjustment of cable length on site. In addition, smaller grids with 6 mm stainless steel rods can be built. The rods are fastened with the integrated clamp screw. Distance between the fasteners up to approx. 80 cm.

Particularly compact proportions and polished surfaces for long term attractivevisual effect. With thread and internal hex head drive to tighten against the wall (DBGM protected). Particularly suitable for building up trellis elements with smaller grid widths.
A DIY Cable Trellis system with all the component pieces required to easily install into any façade: Masonry, Wood, Stucco, Siding etc. and requires no maintenance. You can transform an unsightly façade into an architectural feature wall of bustling life. The design options are limitless and you can easily extend the system by adding more kits. Each kit includes mounting hardware instructions and is comprised of the following components: 9 - Hubs - Stainless Steel 9 - Wall Anchors (M8 x 40mm) 9 – ” No. 12 Wood screws Stainless Steel 1 - 9m x mm (29.5’ x .118&rdquo Cable Stainless Steel 18 - Wire rope end caps * 12pcs + spare 1 - Alan key Stainless Steel