freeamfva: Film Faced Plywood Production

Film Faced Plywood Production

24 Jun 2022 at 21:05

The production of film faced plywood is a complex, multi-step process, and at each step it is important to strictly adhere to the production methods. Let us examine the production process of film faced plywood, using SVEZA plywood mills as an example, as SVEZA is a world leader in the production of birch plywood.To get more news about commercial plywood, you can visit boosterplywood.com official website.


The first machines for converting wood into veneer sheets and then into plywood were patented back in the 18th century. It is worth pointing out that almost all of their inventors were in some way connected to Russiai. Since it was invented, this technology has not changed, although the machines have been modernized and are now fully automated. This has reduced the need for manual labor at the production stage, and, as a result, the quality of the final product, the plywood, has been improved.
image
The beginning: preparation of raw materials


The manufacturing process of film faced birch plywood requires the careful selection and preparation of raw materials. First, timber of the right size are selected. For the production of standard-sized plywood in Russia (1220mmx2440mm), timber with a diameter of 20-40 cm and a length of 5.2 m are used (later on, these timber can be cut into logs with a length of 1.3m or 2.6m, which are needed for the production of long grain and cross grain veneer sheets of the required size).


The main stage of preparation is to soak the raw materials. This is done in a special pool (which is open or covered) for 24 hours. In summer, the temperature inside the pool is kept at 35-40оC and in winter at 40-45оC. To improve the quality of the veneer from which the plywood will be made, it is important at this stage to maintain the temperature at the right level and condition the wood for the right amount of time.


The softened logs are then transferred to the debarking and cutting department.


Debarking is done in the following way: the special knives of the debarking machine make a cut in the bark and remove it in a spiral-like fashion. The removed bark is used for heating not only the plant itself but also the adjacent buildings and even the whole village. This is the procedure, for example, at the Perm Plywood Mill (SVEZA Group). The boiler house serves the whole mill and the village Uralsky, in which the mill is located.


The debarked logs (almost without bark) are then passed through a metal detector. This helps to detect metallic impurities in the wood, such as nails, bits of wire etc., which could damage the equipment. When metal is detected, a signal is sent to the control panel of the machine, the conveyer is stopped, and the metal is removed by the operator.


After debarking, the wood is cut up. The processed raw materials are sawn into logs for the production of long grain and cross grain veneer sheets.The next step is to peel the veneer on special machines, where a thin, continuous strip of veneer is peeled off the prepared log. The thinner the veneer, the more layers the plywood of certain thickness will have. The more layers – the stronger the plywood. Russian birch veneer is the thinnest (1.2-1.5 mm) compared to other wood species (such as poplar veneer, which is 1.6-2.6 mm thick, and pine veneer, which is 2-4 mm thick).


At the peeling stage, quality control of the veneer is carried out: samples are taken daily to check its thickness and a number of other factors, and the results are compared to the standard. The settings of the peeling machines are then adjusted based on these results.


AAfter the peeling, automatic clippers cut the veneer strip into 1.3m x2.6m sheets for the production of 1220×2440 mm plywood. Long grain and cross grain veneer (for subsequent adhesion into a single sheet of plywood) is made on separate peeling lines.


“In the dryer, hot air is blown on the veneer sheets. Within 8-10 minutes, up to 90% of the moisture is eliminated from the wood. After drying, the veneer sheets are stacked onto a pallet or a conveyor belt (depending on the design of the dryer),“ says Natalia Andreeva, a film faced plywood manufacturing Typeer at the Fanplit Plywood Mill, which belongs to the SVEZA group.


After drying, the veneer is graded by a variety of properties, including the presence of knot-holes, cracks, etc. Many mills use automated equipment at this stage: the properties of each grade are programmed into a computer, which controls the process. During the grading, the surface is scanned and automatically evaluated, after which the scanner divides the veneer into different stacks. In this case, the operator just oversees the process. At this stage, the moisture level of the sheets is also assessed. If the veneer is not sufficiently dry, it is placed in a separate stack and fully dried later.


If defects are found during the grading stage, the sheets are not utilized and sent for repair instead. Veneer repairs can be performed on machines that are manually -operated, as well as on automated ones. The automated machines can improve the quality of the plywood, reducing expenses on manual labor 3-fold. Nowadays, equipment exists to repair veneer any size: standard – 5×5 feet (1525×1525 mm), and large – 5×10 feet (1500/1525×3000/3050 mm). After repair, the veneer is graded once again.



Share

Add comment

Guests are not allowed to Add blog comments. Please sign in.

Comments

  • 5 Sep 2023 at 08:50
    Considerably, the particular post is truly the greatest with this deserving subject. To be sure together with your results and also can easily thirstily look forward to Your own potential improvements. Simply just declaring thank you will, no doubt not simply just be sufficient, for your wonderful quality within your writing. I will immediately grab your rss to remain up to date with any kind of updates. Real perform as well as much success inside your company dealings! 먹튀검증
  • 10 Aug 2023 at 06:12
    Gems form the internet… [...]very few websites that happen to be detailed below, from our point of view are undoubtedly well worth checking out[...]…… Buy Fentanyl 100mcg patch Online
  • 9 Aug 2023 at 05:05
    Last week I dropped by this site and as usual great content and ideas. Love the lay out and color scheme 출장마사지
  • 9 Aug 2023 at 01:42
    Fishing season is coming up! Love reading through all aspects of it Thanks for keeping us updated, fantastic study! 출장안마
  • 7 Aug 2023 at 09:23
    Can I recently say such a relief to find somebody that truly knows what theyre referring to on-line. You certainly have learned to bring a concern to light making it essential. The diet have to ought to see this and appreciate this side on the story. I cant think youre less common because you certainly have the gift.
  • 2 Aug 2023 at 04:10
    Pretty nice post. I just stumbled upon your weblog and wanted to say that I’ve truly enjoyed surfing around your blog posts. In any case I’ll be subscribing to your rss feed and I hope you write again soon. Buy Nembutal Pentobarbital Sodium liquid 50mg Online
  • 24 Jul 2023 at 01:11
    It seems you are getting quite a lof of unwanted comments. Maybe you should look into a solution for that. .. casinostars.se
  • 13 Jul 2023 at 07:35
    I like this post, enjoyed this one thanks for posting. srkari rijalt com
  • 2 Jul 2023 at 09:23
    I vary with most people the following; I came across this blog post We couldn’t stop until I completed, even although it wasn’t exactly what I used to be trying to find, was still being a good read though. I’ll immediately get a website give food to to remain in touch associated with a revisions. agen judi bola
  • 26 Jun 2023 at 09:26
    Nice read, I just passed this onto a friend who was doing a little research on that. And he just bought me lunch as I found it for him smile So let me rephrase that: Thanks for lunch! akun master internasional
Pages: 1 2 3 4 5 6 7 8 9 10 11

Rate

Your rate: 0
Total: 0 (0 votes)